中文简体
Previous Post
The appeal of leather texture boards lies in the unity of visual and tactile experience–goat texture and woven textures bring a leather‑like warmth and affinity, naturally conveying a "soft" signal in spatial language.
But designers and homeowners often have a concern:
Leather textures are so delicate–will they get scratched in daily use?
Keys, zippers, pet claws–will these hard objects leave permanent marks on the leather texture?
YAKCO Leather Design Melamine Board addresses this concern with a 2026 national test report.
More：yakco technology
Resistance to Surface Scratching 1.5N: Leather textures "do not break"
The delicate feel of leather texture is its biggest selling point, but it is also the most frequently questioned aspect–the finer the texture, the more conspicuous any scratches become.
YAKCO achieved 1.5N in resistance to surface scratching, with no more than 90% continuous scratch under the standard load.
This means that keys, zippers, or the edges of metal ornaments sliding across the board surface will not leave long, deep continuous scars on the leather texture– only extremely slight and discontinuous marks may appear.
For pet‑owning families：
a cat gently pawing, a dog scratching against the wall–these daily actions will not leave visible scratches on the leather surface.
Areas such as sofa feature walls and bedroom wardrobe doors can confidently use leather grain finishes without the need for additional protective panels.
For commercial spaces:
cabinet doors and walls in hotel guest rooms and boutique store changing rooms face daily scraping from suitcase wheels and metal buckles–yet the leather texture remains intact.
Wear Value 35 mg/100r: Daily wiping "does not wear out" the surface
The grooves and gaps of leather texture are a natural structure, and cleaning requires wiping with a damp cloth or sponge.
If wear resistance is poor, after a few years the sense of concavo-convex of the leather texture will be "worn flat", the surface becomes smooth and shiny, and the leather feel is lost.
YAKCO achieved a wear value of only 35 mg/100r, far better than the national standard requirement of ≤80 mg/100r.
This means that even with daily cleaning and wiping, the goat texture and woven textures of the leather retain their clear sense of concavo-convex and original colour –no local "polished" areas or whitening.
For families with pets, wall cladding near the floor and cabinets in pet activity areas endure even higher wiping frequencies. YAKCO's low wear value provides substantial durability assurance for long‑term use.
Resistance to Surface Staining Grade 5: Texture grooves "do not trap dirt"
The most frequently questioned aspect of leather grain is the cleanliness of its textured grooves–can coffee, red wine, or soy sauce penetrate into the grooves and become impossible to remove?
YAKCO achieved Grade 5 in resistance to surface staining (the highest level), while the national standard only requires ≥ Grade 4.
This means that common household contaminants–coffee, juice, soy sauce, red wine–when spilled on the leather surface, can be wiped clean with a damp cloth– no staining, no residue.
The dense resin overlay of the leather texture board extends into the textured grooves, so liquids cannot penetrate, making daily maintenance as convenient as with smooth panels.
For family‑friendly spaces:
the wall next to a child's dining chair, paint pen marks on a desk, spilled milk–none of these are cleaning problems anymore.
Substrate Support: The "gentleness" of leather texture needs a "hard" substrate to back it up
The scratch resistance, wear resistance, and stain resistance of leather texture board ultimately depend on the underlying support of the substrate.
YAKCO's substrate has a stable density of 0.72 g/cm³ and internal bond of 0.37 MPa, ensuring that the leather texture is clear and undistorted during pressing, and that no micro‑cracks or delamination occur due to substrate deformation over long‑term use.
Conclusion: The gentleness of leather texture does not have to come at the cost of constant caution
The value proposition of YAKCO Leather Design Melamine Board is straightforward: leather texture surfaces can have both "warm touch" and "long‑lasting durability".
Pet‑owning families do not have to give up leather aesthetics to prevent scratching
family‑friendly spaces do not have to choose cold industrial panels for easy cleaning
commercial spaces do not have to sacrifice premium texture for durability
Scratch resistance 1.5N, wear value 35 mg/100r, and stain resistance Grade 5– translated into daily use, these data mean: leather textures do not scratch, do not wear out, and do not absorb stain.
When designers recommend leather texture boards for projects that pursue a warm touch, they can confidently say: its delicacy can withstand the tests of the real world.
YAKCO specialises in the R&D and manufacturing of Melamine Faced Board, offering parallel series of Leather Design, 3D embossed wood grain, rock design, and Art Deco, providing "warm touch, hardcore performance" decorative solutions for high‑end residential and commercial spaces.
